User's Manual 67. Configuration Parameters Reference
Version 6.8 797 Mediant 500L MSBR
67.2 Networking Parameters
This subsection describes the device's networking parameters.
67.2.1 Multiple VoIP Network Interfaces and VLAN Parameters
The IP network interfaces and VLAN parameters are described in the table below.
Table 67-10: IP Network Interfaces and VLAN Parameters
Parameter Description
Interface Table
Web: Interface Table
EMS: IP Interface Settings
CLI: configure voip >
interface network-if display
[InterfaceTable]
This table parameter configures the Interface table.
The format of the ini file table parameter is as follows:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
[\InterfaceTable]
For a detailed description of this table, see ''Configuring IP Network
Interfaces'' on page 138.
Note: For this parameter to take effect, a device reset is required.
[EnableNTPasOAM]
Defines the application type for Network Time Protocol (NTP) services.
ï‚§ [1] = OAMP (default)
ï‚§ [0] = Control
Note: For this parameter to take effect, a device reset is required.