AudioCodes Mediant 500L MSBR User Manual

User's Manual 54. VoIP Status
Version 6.8 699 Mediant 500L MSBR
54.9 Viewing Registered Users
You can view SAS and SBC users listed in the device's Users Registration database. The
list shows each Address of Record (AOR) and its corresponding contact. The contact's
registration status is also shown:

"Active status:1" indicates that the contact has been successfully registered and thus,
calls can be routed to it.

"Active status:0" indicates that the device has recently received a REGISTER request
from the contact, but the contact has yet to be registered. The device removes the
contact from the database if no response is received within 10 seconds from the
proxy/registrar server.
An AOR is a SIP or SIPS URI that points to a domain with a location service that can map
the URI to another URI (contact) where the user might be available. A contact is a SIP URI
that can be used to contact that specific instance of the user agent for subsequent
requests.
 To view registered SAS/SBC users in the Users Registration database:

Web: SAS/SBC Registered Users page (Status & Diagnostics tab > VoIP Status
menu > SAS/SBC Registered Users).
Figure 54-9: SAS/SBC Registered Users Page

CLI:
• SBC users:
# show voip register db sbc list
• SBC contacts of a specified AOR:
# show voip register db sbc user <Address Of Record>
• SAS users:
# show voip register db sas list

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English