User's Manual 43. Resetting Channels
Version 6.8 609 Mediant 500L MSBR
43 Resetting Channels
43.1 Resetting an Analog Channel
You can inactivate (reset) an FXO or FXS analog channel. This is sometimes useful, for
example, when the device (FXO) is connected to a PBX and the communication between
the two can't be disconnected (e.g., when using reverse polarity). This is done in the Web
interface's Home page.
 To reset an analog channel:
1. Open the Home page.
2. Click the required FXS or FXO port icon; a shortcut menu appears.
3. From the shortcut menu, choose Reset Channel; the channel is changed to inactive
and the port icon is displayed in gray.
To Next Page
Need help?
General
