AudioCodes Mediant 500L MSBR User Manual

User's Manual 18. Services
Version 6.8 231 Mediant 500L MSBR
Parameter Description
[LdapConfiguration_useTLS
]
them to the LDAP server.
 [0] No = (Default) Username and password are sent in clear-text
format.

[1]
Yes
Connection Status
CLI: connection-status
[LdapConfiguration_Connec
tionStatus]
(Read-only) Displays the connection status with the LDAP server.
 "Not Applicable"
 "LDAP Connection Broken"
 "Connecting"
 "Connected"
Note: For more information about a disconnected LDAP connection,
see your Syslog messages generated by the device.
18.4.4 Configuring LDAP DNs (Base Paths) per LDAP Server
The LDAP Search DN table lets you configure LDAP base paths. The table is a "child" of
the LDAP Configuration table (see ''Configuring LDAP Servers'' on page 228) and
configuration is done per LDAP server. For the device to run a search using the LDAP
service, the base path to the directory’s subtree, referred to as the distinguished name
object (or DN), where the search is to be done must be configured. For each LDAP server,
you can configure up to three base paths.
The following procedure describes how to configure DNs per LDAP server in the Web
interface. You can also configure this using the table ini file parameter,
LdapServersSearchDNs or CLI command, configure voip/ldap/ldap-servers-search-dns.
 To configure an LDAP base path per LDAP server:
1. Open the LDAP Configuration Table page (Configuration tab > VoIP menu >
Services > LDAP > LDAP Configuration Table).
2. In the LDAP Configuration table, select the row of the LDAP server for which you want
to configure DN base paths, and then click the Search DNs link (located at the bottom
of the page); the LDAP Search DN Table page opens.
3. Click Add; the following dialog box appears:
Figure 18-8: LDAP Search DN Table - Add Record
4. Configure an LDAP DN base path according to the parameters described in the table
below.
5. Click Submit, and then save ("burn") your settings to flash memory.
Table 18-8: LDAP Search DN Table Parameter Descriptions
Parameter Description
Index
CLI: set internal-index
[LdapServersSearchDNs_Index]
Defines an index number for the new table record.
Note: Each table row must be configured with a unique
index.
Base Path
CLI: set base-path
Defines the full path (DN) to the objects in the AD where

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English