AudioCodes Mediant 500L MSBR User Manual

User's Manual 76 Document #: LTRT-10466
Mediant 500L MSBR
The Enable mode groups the configuration commands under the following command
sets:
• config-system: Provides the general and system related configuration
commands, for example, Syslog configuration. This set is accessed by typing the
following command:
# configure system
(config-system)#
• config-voip: Provides the VoIP-related configuration commands, for example,
SIP and media parameters, and VoIP network interface configuration. This set is
accessed by typing the following command:
# configure voip
(config-voip)#
• configure-data: Provides the data-router related configuration commands. This
set is accessed by typing the following command:
# configure data
(config-data)#
9.1.2 Using CLI Shortcuts
The CLI provides several editing shortcut keys to help you configure your device more
easily, as listed in the table below.
Table 9-1: CLI Editing Shortcut keys
Shortcut Key Description
Up arrow key Retypes the previously entered command. Continuing to press the Up
arrow key cycles through all commands entered, starting with the most
recent command.
<Tab> key Pressing the <Tab> key after entering a partial (but unique) command
automatically completes the command, displays it on the command prompt
line, and waits for further input.
Pressing the <Tab> key after entering a partial and not unique command
displays all completing options.

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English