AudioCodes Mediant 500L MSBR User Manual

User's Manual 826 Document #: LTRT-10466
Mediant 500L MSBR
67.5 Quality of Experience Parameters
The Quality of Experience (QoE) parameters are described in the table below.
Table 67-29: Quality of Experience Parameters
Parameter Description
SEM Parameters
Web: Server IP
CLI: configure voip/qoe
configuration/server-ip
[QOEServerIP]
Defines the IP address of the primary Session Experience Manager
(SEM) server to where the quality experience reports are sent.
Note: For this parameter to take effect, a device reset is required.
Web: Redundant Server IP
CLI: configure voip > qoe
configuration > set
secondary-server-ip
[QOESecondaryServerIp]
Defines the IP address of the secondary SEM server to where the
quality experience reports are sent. This is applicable when the
SEM/EMS server is in Geographical Redundancy HA mode.
Note: For this parameter to take effect, a device reset is required.
Web: Interface Name
CLI: configure voip/qoe
configuration/interface-name
[QOEInterfaceName]
Defines the IP network interface on which the quality experience
reports are sent.
The default is the OAMP interface.
Note: For this parameter to take effect, a device reset is required.
Quality of Experience Profile Table
Web: Quality of Experience
Profile
CLI: configure voip/qoe qoe-
profile
[QOEProfile]
This table parameter defines Quality of Experience Profiles.
The format of the ini file table parameter is as follows:
[QOEProfile]
FORMAT QOEProfile_Index = QOEProfile_Name,
QOEProfile_SensitivityLevel;
[\QOEProfile]
For a detailed description of this table, see ''Configuring Quality of
Experience Profiles'' on page 264.
Quality of Experience Color Rules Table
Web: Quality of Experience
Color Rules
CLI: configure voip/qoe qoe-
profile qoe-color-rules
[QOEColorRules]
This table parameter defines Quality of Experience Color Rules.
The format of the ini file table parameter is as follows:
[QOEColorRules]
FORMAT QOEColorRules_Index = QOEColorRules_QoeProfile,
QOEColorRules_ColorRuleIndex, QOEColorRules_monitoredParam,
QOEColorRules_direction, QOEColorRules_profile,
QOEColorRules_GreenYellowThreshold,
QOEColorRules_GreenYellowHysteresis,
QOEColorRules_YellowRedThreshold,
QOEColorRules_YellowRedHysteresis;
[\QOEColorRules]
For a detailed description of this table, see ''Configuring Quality of
Experience Profiles'' on page 264.
Bandwidth Profile Table
Web: Bandwidth Profile
CLI: configure voip/qoe bw-
profile
[BWProfile]
This table parameter defines Bandwidth Profiles.
The format of the ini file table parameter is as follows:
[BWProfile]
FORMAT BWProfile_Index = BWProfile_Name,

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English