AudioCodes Mediant 500L MSBR User Manual

User's Manual 4. Configuring VoIP LAN Interface for OAMP
Version 6.8 35 Mediant 500L MSBR
9. Configure the IP address:
(network-if-0)# ip-address <IP address>
10. Configure the prefix length:
(network-if-0)# prefix-length <prefix length / subnet mask, e.g., 16>
11. Configure the Default Gateway address:
(network-if-0)# gateway <IP address>
12. Exit the Interface table:
(network-if-0)# exit
13. Exit the VoIP configuration mode:
(config-voip)# exit
14. Reset the device with a flash burn:
# reload now
15. Cable the device to your network. You can now access the device's management
interface using this new OAMP IP address.

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English