AudioCodes Mediant 500L MSBR User Manual

User's Manual 494 Document #: LTRT-10466
Mediant 500L MSBR
Table 30-4: Call Forward Table Parameter Descriptions
Parameter Description
Index
[FwdInfo_Index]
(Read-only) Displays the index number of the table record.
Module
[FwdInfo_Module]
(Read-only) Displays the module number on which the port is located.
Port
[FwdInfo_Port]
(Read-only) Displays the port number.
Port Type
[FwdInfo_PortType]
(Read-only) Displays the port type (FXS or FXO).
Type
CLI: type
[FwdInfo_Type]
Defines the condition upon which the call is forwarded.
 [0] Deactivate = (Default) Don't forward incoming calls.
 [1] On Busy = Forward incoming calls when the port is busy.
 [2] Unconditional = Always forward incoming calls.
 [3] No Answer = Forward incoming calls that are not answered within
the time specified in the 'No Reply Time' field.
 [4] On Busy or No Answer = Forward incoming calls when the port is
busy or when calls are not answered within the time specified in the
'No Reply Time' field.
 [5] Don't Disturb = Immediately reject incoming calls.
Forward Destination
CLI: destination
[FwdInfo_Destination]
Defines the telephone number or URI (<number>@<IP address>) to
where the call is forwarded.
Note:
If this parameter is configured with only a telephone number and a
Proxy isn't used, this forwarded-to phone number must be specified in
the Outbound IP Routing table (see ''Configuring Outbound IP Routing''
on page
405).
No Reply Time
CLI: no-reply-time
[FwdInfo_NoReplyTime]
If you have set the 'Type' parameter for this port to No Answer or On
Busy or No Answer, then configure the number of seconds the device
waits before forwarding the call to the specified phone number.

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English