AudioCodes Mediant 500L MSBR User Manual

User's Manual 574 Document #: LTRT-10466
Mediant 500L MSBR
The following procedure describes how to configure the SBC Alternative Routing Reasons
table in the Web interface. You can also configure this table using the table ini file
parameter, SBCAlternativeRoutingReasons or CLI command, configure voip > sbc routing
sbc-alt-routing-reasons.
 To configure SIP reason codes for alternative IP routing:
1. Open the SBC Alternative Routing Reasons page (Configuration tab > VoIP menu >
SBC > Routing SBC > Alternative Routing Reasons).
2. Click Add; the following dialog box appears:
Figure 36-6: Alternative Routing Reasons Table - Add Record
3. Configure a SIP response code for alternative routing according to the parameters
described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 36-4: SBC Alternative Routing Reasons Table Parameter Descriptions
Parameter Description
Index
[SBCAlternativeRoutingReasons_Index]
Defines an index number for the new table
record.
Release Cause
CLI: rel-cause
[SBCAlternativeRoutingReasons_ReleaseCause]
Defines a SIP response code for triggering the
device's alternative routing mechanism.

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English