AudioCodes Mediant 500L MSBR User Manual

User's Manual 67. Configuration Parameters Reference
Version 6.8 911 Mediant 500L MSBR
Parameter Description

Analog interfaces: For information on the Call Waiting feature,
see Call Waiting on page 443.
EMS: Send 180 For Call Waiting
[Send180ForCallWaiting]
Determines the SIP response code for indicating Call Waiting.
 [0] = (Default) Use 182 Queued response to indicate call
waiting.

[1]
= Use 180 Ringing response to indicate call waiting.
Call Waiting Table
Web: Call Waiting Table
EMS: SIP Endpoints > Call
Waiting
CLI: configure voip > gw
analoggw call-waiting
[CallWaitingPerPort]
This table parameter configures call waiting per FXS port. The
format of this The format of the ini file table parameter format of
the ini file table parameter is as follows:
[CallWaitingPerPort]
FORMAT CallWaitingPerPort_Index =
CallWaitingPerPort_IsEnabled, CallWaitingPerPort_Module,
CallWaitingPerPort_Port;
[\CallWaitingPerPort]
For example:
CallWaitingPerPort 0 = 0,1,1; (call waiting disabled for Port 1 of
Module 1)
CallWaitingPerPort 1 = 1,1,2; (call waiting enabled for Port 2 of
Module 1)
Notes:
 This parameter is applicable only to FXS ports.
 For a detailed description of this table, see Configuring Call
Waiting on page 496.
Web: Number of Call Waiting
Indications
EMS: Call Waiting Number of
Indications
CLI: nb-of-cw-ind
[NumberOfWaitingIndications]
Defines the number of call waiting indications that are played to
the called telephone that is connected to the device for Call
Waiting.
The valid range is 1 to 100 indications. The default is 2.
Note: This parameter is applicable only to FXS ports.
Web: Time Between Call Waiting
Indications
EMS: Call Waiting Time Between
Indications
CLI: time-between-cw
[TimeBetweenWaitingIndications]
Defines the time (in seconds) between consecutive call waiting
indications for call waiting.
The valid range is 1 to 100. The default is 10.
Note: This parameter is applicable only to FXS ports.
Web/EMS: Time Before Waiting
Indications
CLI: time-b4-cw-ind
[TimeBeforeWaitingIndications]
Defines the interval (in seconds) before a call waiting indication is
played to the port that is currently in a call.
The valid range is 0 to 100. The default time is 0 seconds.
Note: This parameter is applicable only to FXS ports.
Web/EMS: Waiting Beep
Duration
CLI: waiting-beep-dur
[WaitingBeepDuration]
Defines the duration (in msec) of call waiting indications that are
played to the port that is receiving the call.
The valid range is 100 to 65535. The default is 300.
Note: This parameter is applicable only to FXS ports.
EMS: First Call Waiting Tone ID
[FirstCallWaitingToneID]
Defines the index of the first Call Waiting Tone in the CPT file.
This feature enables the called party to distinguish between
different call origins (e.g., external versus internal calls).
There are three ways to use the distinctive call waiting tones:
 Playing the call waiting tone according to the SIP Alert-Info
header in the received 180 Ringing SIP response. The value of

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English