EasyManuals Logo
Home>Cisco>Network Hardware>ASA Series

Cisco ASA Series User Manual

Cisco ASA Series
2164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1082 background imageLoading...
Page #1082 background image
1-20
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring a Service Policy Using the Modular Policy Framework
Configuration Examples for Modular Policy Framework
hostname(config)# policy-map http_traffic_policy
hostname(config-pmap)# class http_traffic
hostname(config-pmap-c)# inspect http
hostname(config)# service-policy http_traffic_policy global
Applying Inspection and Connection Limits to HTTP Traffic to Specific
Servers
In this example (see Figure 1-3), any HTTP connection destined for Server A (TCP traffic on port 80)
that enters the ASA through the outside interface is classified for HTTP inspection and maximum
connection limits. Connections initiated from Server A to Host A does not match the access list in the
class map, so it is not affected.
Any HTTP connection destined for Server B that enters the ASA through the inside interface is classified
for HTTP inspection. Connections initiated from Server B to Host B does not match the access list in the
class map, so it is not affected.
Figure 1-3 HTTP Inspection and Connection Limits to Specific Servers
See the following commands for this example:
hostname(config)# object network obj-192.168.1.2
hostname(config-network-object)# host 192.168.1.2
hostname(config-network-object)# nat (inside,outside) static 209.165.201.1
hostname(config)# object network obj-192.168.1.0
hostname(config-network-object)# subnet 192.168.1.0 255.255.255.0
hostname(config-network-object)# nat (inside,outside) dynamic 209.165.201.2
hostname(config)# access-list serverA extended permit tcp any host 209.165.201.1 eq 80
hostname(config)# access-list ServerB extended permit tcp any host 209.165.200.227 eq 80
hostname(config)# class-map http_serverA
hostname(config-cmap)# match access-list serverA
hostname(config)# class-map http_serverB
hostname(config-cmap)# match access-list serverB
hostname(config)# policy-map policy_serverA
hostname(config-pmap)# class http_serverA
hostname(config-pmap-c)# inspect http
hostname(config-pmap-c)# set connection conn-max 100
hostname(config)# policy-map policy_serverB
hostname(config-pmap)# class http_serverB
inside outside
Server A
Real Address: 192.168.1.2
Mapped Address: 209.165.201.1
Host B
Real Address: 192.168.1.1
Mapped Address: 209.165.201.2:port
Host A
209.165.200.226
Server B
209.165.200.227
port 80
port 80
insp.
insp.
set conns
143357
Security
appliance

Table of Contents

Other manuals for Cisco ASA Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASA Series and is the answer not in the manual?

Cisco ASA Series Specifications

General IconGeneral
BrandCisco
ModelASA Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals