Cisco ASA Series User Manual

1-31
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Multiple Context Mode
Monitoring Security Contexts
Context "system", is a system resource
Config URL: startup-config
Real Interfaces:
Mapped Interfaces: Control0/0, GigabitEthernet0/0,
GigabitEthernet0/0.10, GigabitEthernet0/1, GigabitEthernet0/1.10,
GigabitEthernet0/1.20, GigabitEthernet0/2, GigabitEthernet0/2.30,
GigabitEthernet0/3, Management0/0, Management0/0.1
Flags: 0x00000019, ID: 257
Context "null", is a system resource
Config URL: ... null ...
Real Interfaces:
Mapped Interfaces:
Flags: 0x00000009, ID: 258
See the command reference for more information about the detail output.
The following is sample output from the show context count command:
hostname# show context count
Total active contexts: 2
Viewing Resource Allocation
From the system execution space, you can view the allocation for each resource across all classes and
class members.
To view the resource allocation, enter the following command:
The following sample output shows the total allocation of each resource as an absolute value and as a
percentage of the available system resources:
hostname# show resource allocation
Resource Total % of Avail
Conns [rate] 35000 N/A
Inspects [rate] 35000 N/A
Syslogs [rate] 10500 N/A
Conns 305000 30.50%
Hosts 78842 N/A
SSH 35 35.00%
Routes 5000 N/A
Telnet 35 35.00%
Xlates 91749 N/A
Other VPN Sessions 20 2.66%
Other VPN Burst 20 2.66%
All unlimited
Command Purpose
show resource allocation [detail]
Shows the resource allocation. This command shows the resource
allocation, but does not show the actual resources being used. See the
“Viewing Resource Usage” section on page 1-34 for more information
about actual resource usage.
The detail argument shows additional information. See the following
sample outputs for more information.

Cisco ASA Series Specifications

General

Brand	Cisco
Model	ASA Series
Category	Network Hardware
Language	English