Cisco ASA Series User Manual

1-19
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Objects
Monitoring Objects
hostname(config)# time-range for2006
hostname(config-time-range)# absolute start 8:00 1 january 2006
The following is an example of a weekly periodic time range from 8:00 a.m. to 6:00 p.m on weekdays:
hostname(config)# time-range workinghours
hostname(config-time-range)# periodic weekdays 8:00 to 18:00
Monitoring Objects
To monitor objects and groups, enter the following commands:
Feature History for Objects
Table 1-2 lists each feature change and the platform release in which it was implemented.
Command Purpose
show access-list
Displays the access list entries that are expanded
out into individual entries without their object
groupings.
show running-config object-group
Displays all current object groups.
show running-config object-group grp_id
Displays the current object groups by their group
ID.
show running-config object-group grp_type
Displays the current object groups by their group
type.
Table 1-2 Feature History for Object Groups
Feature Name
Platform
Releases Feature Information
Object groups 7.0(1) Object groups simplify access list creation and
maintenance.
We introduced or modified the following commands:
object-group protocol, object-group network,
object-group service, object-group icmp_type.
Objects 8.3(1) Object support was introduced.
We introduced or modified the following commands:
object-network, object-service, object-group network,
object-group service, network object, access-list
extended, access-list webtype, access-list remark.
User Object Groups for Identity Firewall 8.4(2) User object groups for identity firewall were introduced.
We introduced the following commands: object-network
user, user.

Cisco ASA Series Specifications

General

Brand	Cisco
Model	ASA Series
Category	Network Hardware
Language	English