Cisco ASA Series User Manual

1-2
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring AAA Servers and the Local Database
Information About AAA
• TACACS+ Server Support, page 1-5
• RSA/SDI Server Support, page 1-5
• NT Server Support, page 1-6
• Kerberos Server Support, page 1-6
• LDAP Server Support, page 1-6
• Local Database Support, Including as a Fallback Method, page 1-8
• How Fallback Works with Multiple Servers in a Group, page 1-8
• Using Certificates and User Login Credentials, page 1-9
• Task Flow for Configuring AAA, page 1-11
Information About Authentication
Authentication controls access by requiring valid user credentials, which are usually a username and
password. You can configure the ASA to authenticate the following items:
• All administrative connections to the ASA, including the following sessions:
– Telnet
– SSH
– Serial console
– ASDM using HTTPS
– VPN management access
• The enable command
• Network access
• VPN access
Information About Authorization
Authorization controls access per user after users are authenticated. You can configure the ASA to
authorize the following items:
• Management commands
• Network access
• VPN access
Authorization controls the services and commands that are available to each authenticated user. If you
did not enable authorization, authentication alone would provide the same access to services for all
authenticated users.
If you need the control that authorization provides, you can configure a broad authentication rule, and
then have a detailed authorization configuration. For example, you can authenticate inside users who try
to access any server on the outside network and then limit the outside servers that a particular user can
access using authorization.
The ASA caches the first 16 authorization requests per user, so if the user accesses the same services
during the current authentication session, the ASA does not resend the request to the authorization
server.

Cisco ASA Series Specifications

General

Brand	Cisco
Model	ASA Series
Category	Network Hardware
Language	English