1-10
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring DHCP
DHCP Monitoring Commands
DHCP Monitoring Commands
To monitor DHCP, enter one or more of the following commands:
Feature History for DHCP
Table 1-3 each feature change and the platform release in which it was implemented.
Command Purpose
show running-config dhcpd Shows the current DHCP configuration.
show running-config dhcprelay Shows the current DHCP relay service status.
show ipv6 dhcprelay binding Shows the relay binding entries that were created by the relay
agent.
show ipv6 dhcprelay statistics Shows DHCP relay agent statistics for IPv6.
clear config ipv6 dhcprelay Clears the IPv6 DHCP relay configuration.
Table 1-3 Feature History for DHCP
Feature Name Releases Description
DHCP 7.0(1) The ASA can provide a DHCP server or DHCP relay services to DHCP clients
attached to ASA interfaces.
We introduced the following commands: dhcp client update dns, dhcpd address,
dhcpd domain, dhcpd enable, dhcpd lease, dhcpd option, dhcpd ping timeout,
dhcpd update dns, dhcpd wins, dhcp-network-scope, dhcprelay enable,
dhcprelay server, dhcprelay setroute, dhcprelay trusted, dhcp-server. show
running-config dhcpd, and show running-config dhcprelay.
DHCP for IPv6
(DHCPv6)
9.0(1) Support for IPv6 was added.
We introduced the following commands: ipv6 dhcprelay server, ipv6 dhcprelay
enable, ipv6 dhcprelay timeout, clear config ipv6 dhcprelay, ipv6 nd
managed-config-flag, ipv6 nd other-config-flag, debug ipv6 dhcp, debug ipv6
dhcprelay, show ipv6 dhcprelay binding, clear ipv6 dhcprelay binding, show
ipv6 dhcprelay statistics, and clear ipv6 dhcprelay statistics.
To Next Page
Loading...
Need help?
General
