Context
To ensure that power cables are connected in order, you are advised to plan power
cable routing.
Do not bundle or route outdoor cables (such as outdoor antenna feeders and
outdoor power cables) and indoor cables together in the cabinet or on the cable
tray.
If the cables on the right side are tightly bundled but the cabling space is still
insucient, you can route the extra cables on the left side. In the case of left-side
cabling, keep the cables away from the upper and lower board, power module,
and fan module insertion/removal areas to facilitate future maintenance.
Power Cable Routing Planning
It is recommended that AC power cables be routed on the left side of the cabinet.
It is recommended that cables, such as optical
bers, and Ethernet cables, be
routed on the left and right sides of the cabinet as the circumstances may require.
Figure 4-63 shows the cable layout of an AC device.
Figure 4-63 Cable layout
4.1.7 Installation of cables
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 416
To Next Page
Loading...
Need help?
General
