Huawei NetEngine 8000 F User Manual

Item Indicator Color Status Description
Working
status
indicator
STAT Green The device works normally.
Red The hardware is faulty.
- If this indicator is steady o, the
device is not running or no power
is input.
Connection/
data
transmission
status
indicator
L/A Green If this indicator is steady green, the
link is Up.
If this indicator blinks, data is
being received and transmitted.
Orange If this indicator blinks, data is
being received and transmitted.
- If this indicator is steady o, the
link is Down.
Breakout
channel
indicator
Breakout
0-3
Green Each indicator for channels 0, 1, 2,
and 3 turns on for 5s in sequence
to indicate the status of the
corresponding channel. This
process repeats.
4.1.10 (Optional) Checking Optical Power
The following table describes comparison between the transmit optical power of
50 Gbps optical modules and damaged optical power threshold at the receive end:
Optical
Module Type
Maximum
Average
Transmit
Optical
Power
Minimum
Average
Transmit
Optical
Power
Damaged
Optical
Power
Threshold at
the Receive
End
Description
50GBASE-FR 3 -4.1 5.2 The damaged
optical power
threshold is
greater than
the maximum
average
transmit
optical power,
posting low
self-loop risks.
50GBASE-LR 4.2 -4.5 5.2
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 427

Huawei NetEngine 8000 F Specifications

General

Brand	Huawei
Model	NetEngine 8000 F
Category	Network Router
Language	English