CHAPTER 11
Installation Overview
•
Installation Overview for the SRX550 High Memory Services Gateway on page 87
•
Required Tools and Parts for Installing the SRX550 High Memory Services
Gateway on page 88
•
Installation Instructions Warning on page 88
•
SRX550 High Memory Services Gateway Autoinstallation Overview on page 89
Installation Overview for the SRX550 High Memory Services Gateway
After you have prepared the site for installation and unpacked the SRX550 High Memory
Services Gateway, you are ready to install the device. It is important to proceed through
the installation process in the following order:
1. Review the safety guidelines explained in “General Electrical Safety Guidelines and
Warnings” on page 211.
2. Prepare the services gateway for installation as described in “Preparing the SRX550
High Memory Services Gateway for Rack-Mount Installation” on page 95.
3. Install the services gateway as described in “Installing the SRX550 High Memory
Services Gateway in a Rack” on page 97.
4. Connect cables to external devices.
5. Connect the grounding cable as described in “Grounding the SRX550 High Memory
Services Gateway” on page 106.
6. Power on the services gateway as described in “Powering On the SRX550 High Memory
Services Gateway” on page 120.
Related
Documentation
General Electrical Safety Guidelines and Warnings on page 211•
• Preparing the SRX550 High Memory Services Gateway for Rack-Mount Installation on
page 95
• Installing the SRX550 High Memory Services Gateway in a Rack on page 97
• Grounding the SRX550 High Memory Services Gateway on page 106
• Powering On the SRX550 High Memory Services Gateway on page 120
87Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
