Related
Documentation
Preparing the SRX550 High Memory Services Gateway for Rack-Mount Installation on
page 95
•
• Installation Overview for the SRX550 High Memory Services Gateway on page 87
Verifying Parts Received with the SRX550 High Memory Services Gateway
The SRX550 High Memory Services Gateway shipment package contains a packing list.
Check the parts in the shipment against the items on the packing list. The packing list
specifies the part numbers and carries a brief description of each part in your order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see http://www.juniper.net/support/requesting-support.html.
A fully configured services gateway contains the chassis with installed components,
listed in Table 46 on page 92, and an accessory box, which contains the parts listed in
Table 47 on page 93.
NOTE: The parts shipped with your services gateway can vary depending on
the configuration you ordered.
Table 46: Parts List for a Fully Configured SRX550 High Memory Services
Gateway
QuantityComponent
12U SRX550 High Memory Services Gateway chassis with 6 GPIM slots, 2 Mini-PIM
slots, 1 ACE slot, 2 power supply slots, 6 10/100/1000 base-T ports, and 4 Gigabit
Ethernet SFP ports. Includes blank covers for GPIM slots (6 covers for GPIM slots),
Mini-PIM slots, ACE slot, and power supply slots.
NOTE: The ACE slot is not used.
1Front-mount and mid-mount rack-mount kit
1RJ-45 cable
1DB9-to-RJ45 adapter
1USB console cable with Type-A and Mini-B USB plugs
Copyright © 2016, Juniper Networks, Inc.92
SRX550 High Memory Services Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
