CHAPTER 16
Connecting the SRX550 High Memory
Services Gateway to External Devices
•
Organizing Interface Cables on the SRX550 High Memory Services Gatewayon page 109
•
Connecting the Modem to the Console Port on the SRX550 High Memory Services
Gateway on page 110
•
Connecting to the SRX550 High Memory Services Gateway from the CLI with the USB
Console Port on page 110
•
Connecting the CLI at the User End for the SRX550 High Memory Services
Gateway on page 112
•
Configuring the Modem at the SRX550 High Memory ServicesGatewayEnd on page 113
Organizing Interface Cables on the SRX550 High Memory Services Gateway
Arrange network cables as follows to prevent them from dislodging or developing stress
points:
•
Secure cables so that they are not supporting their own weight as they hang to the
floor.
•
Place excess cable out of the way in neatly coiled loops.
•
Use fasteners to maintain the shape of cable loops.
Related
Documentation
Preventing Electrostatic Discharge Damage to the SRX550 High Memory Services
Gateway on page 194
•
• Connecting the SRX550 High Memory Services Gateway to the AC Power Source on
page 115
• Connecting the SRX550 High Memory Services Gateway to a DC Power Source on
page 117
• Grounding the SRX550 High Memory Services Gateway on page 106
109Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
