NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical code
(NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3).
Table 29 on page 65 provides power cord specifications, and Figure 16 on page65 depicts
the plug on the AC power cord provided for each country or region.
Table 29: AC Power Cord Specifications
Plug StandardsElectrical SpecificationCountry
AS/NZ 3112-1993250 VAC, 10 A, 50 HzAustralia
GB2099.1 1996 and
GB 1002 1996
(CH1-10P)
250 VAC, 10 A, 50 HzChina
CEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy and United Kingdom)
CEI 23-16/VII250 VAC, 10 A, 50 HzItaly
JIS 8303125 VAC, 12 A, 50 or 60 HzJapan
NEMA 5-15125 VAC, 10 A, 60 HzNorth America
BS 1363A250 VAC, 10 A, 50 HzUnited Kingdom
Figure 16: AC Plug Types
NOTE: Power cords and cables must not block access to services gateway
components or drape where people might trip on them.
Related
Documentation
SRX550 High Memory Services Gateway Power Supply on page 41•
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX550 High
Memory Services Gateway on page 58
• SRX550 High Memory Services Gateway Electrical Wiring Guidelines on page 63
• Site Preparation Checklist for the SRX550 High Memory Services Gateway on page 47
65Copyright © 2016, Juniper Networks, Inc.
Chapter 9: Power Requirements and Specifications
To Next Page
Loading...
Need help?
General
