22 THROTTLE VALVE BODY 189
22.1 Performing the initialization run
Condition
The diagnostics tool is connected and running.
401897-01
– Execute "Engine electronics" > "Functions" > "Delete adaptation values".
The adaptation values are deleted.
– Switch off ignition.
– Disconnect the diagnostics tool.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
– Start the engine without activating the throttle grip.
Guideline
Coolant temperature < 25 °C (< 77 °F)
– Let the engine idle for at least 10 minutes (600 seconds).
Info
Do not activate the throttle grip during the initialization process.
– Switch off the ignition after 10 minutes (600 seconds).
Info
If initialization is not completed or if the initialization process was inter-
rupted, the entire process must be restarted.
To Next Page
Loading...
Need help?
General
