EasyManuals Logo
Home>Lenze>Inverter>i55AE155F

Lenze i55AE155F User Manual

Lenze i55AE155F
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #354 background imageLoading...
Page #354 background image
Parameter Name / value range / [default seng] Info
0x23B9
(P517.00)
Modbus TCP/IP network status
(MBTCP netw stat)
Read only
From version 04.00
Display of the acve network status.
0 No conguraon
1 Inializaon
2 Connecon me-out
3 Conguraon error
4 Not connected
5 Connecon established
0x23BA:001
(P580.01)
Modbus TCP stascs: Messages received
(MBTCP stascs: Rx messages)
Read only
From version 04.00
Display of the total number of messages received.
This counter counts both valid and invalid messages.
Aer the maximum value has been reached, the counter starts again
"0".
0x23BA:002
(P580.02)
Modbus TCP stascs: Valid messages received
(MBTCP stascs: Valid Rx messag.)
Read only
From version 04.00
Display of the number of valid messages received.
Aer the maximum value has been reached, the counter starts again
"0".
0x23BA:003
(P580.03)
Modbus TCP stascs: Messages with excepons
(MBTCP stascs: Mess. w. except)
Read only
From version 04.00
Display of the number of messages with excepons that have been
received.
Aer the maximum value has been reached, the counter starts again
"0".
0x23BA:005
(P580.05)
Modbus TCP stascs: Messages sent
(MBTCP stascs: Tx messages)
Read only
From version 04.00
Display of the total number of messages sent.
Aer the maximum value has been reached, the counter starts again
"0".
0x23BE:001
(P585.01)
Modbus TCP/IP diagnoscs of last Rx/Tx data: Receive
oset
(MBTCP Tx/Rx diag: Rx oset)
0 ... [0] ... 240
From version 04.00
For diagnosc purposes, the last received message (max. 16 bytes) is dis-
played in 0x23BE:002 (P585.02). For longer messages, an oset can be
specied here, indicang from which byte of the message the display of
the 16 bytes is to start.
0x23BE:002
(P585.02)
Modbus TCP/IP diagnoscs of last Rx/Tx data: Last Rx
message
(MBTCP Tx/Rx diag: Last Rx message)
Read only
From version 04.00
Display of the message received last.
0x23BE:003
(P585.03)
Modbus TCP/IP diagnoscs of last Rx/Tx data: Trans-
mit oset
(MBTCP Tx/Rx diag: Tx oset)
0 ... [0] ... 240
From version 04.00
For diagnosc purposes, the last sent message (max. 16 bytes) is dis-
played in 0x23BE:004 (P585.04). For longer messages, an oset can be
specied here, indicang from which byte of the message the display of
the 16 bytes is to start.
0x23BE:004
(P585.04)
Modbus TCP/IP diagnoscs of last Rx/Tx data: Last Tx
message
(MBTCP Tx/Rx diag: Last Tx message)
Read only
From version 04.00
Display of the message sent last.
0x23B1:005
(P510.05)
Modbus -TCP/IP sengs: IP conguraon
(MBTCP sengs: IP conguraon)
From version 04.00
Set IP conguraon.
0 Stored IP The currently saved IP conguraon is used.
1 BOOTP The IP conguraon is assigned by the master via BOOTP.
2 DHCP The IP conguraon is assigned by the Master via DHCP.
The assignment of a gateway address that is not in the same subnetwork
as the IP address, is denied.
Conguring the network
Modbus TCP
Diagnoscs
354

Table of Contents

Other manuals for Lenze i55AE155F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lenze i55AE155F and is the answer not in the manual?

Lenze i55AE155F Specifications

General IconGeneral
BrandLenze
Modeli55AE155F
CategoryInverter
LanguageEnglish

Related product manuals