Lenze i55AE155F User Manual

65291 0xFF0B Motor phase failure phase V Keypad display: Phase V failure
Cause Error type/response Remedy
A failure of the motor phase V has been detec-
ted.
No response
•
The error can only be reset aer a blocking
me of 2 s.
•
The error type can be congured in
0x2D45:001 (P310.01).
•
Check wiring between inverter and motor.
•
In case of a false tripping, adapt the sengs
for the motor phase failure detecon.
Related topics
4Motor phase failure detecon ^ 223
65292 0xFF0C Motor phase failure phase W Keypad display: Phase W failure
Cause Error type/response Remedy
A failure of the motor phase W has been detec-
ted.
No response
•
The error can only be reset aer a blocking
me of 2 s.
•
The error type can be congured in
0x2D45:001 (P310.01).
•
Check wiring between inverter and motor.
•
In case of a false tripping, adapt the sengs
for the motor phase failure detecon.
Related topics
4Motor phase failure detecon ^ 223
65305 0xFF19 Motor parameter idencaon error Keypad display: Motor ID fault
Cause Error type/response Remedy
During the automac idencaon of the
motor, an error has occurred.
Fault
•
Set motor data so that they comply with the
data on the motor nameplate.
•
Check wiring of the motor.
65334 0xFF36 Brake resistor: overload warning Keypad display: BrkResistor OL.W
Cause Error type/response Remedy
The calculated thermal load of the brake resis-
tor has reached the warning threshold set in
0x2550:008 (P707.08). The regenerave energy
is too high.
Warning
•
The error type can be congured in
0x2550:010 (P707.10).
•
Check drive dimensioning.
•
Check sengs for the brake energy manage-
ment.
Note: The warning status is reset if the thermal
load falls below the warning threshold of - 20
%.
Related topics
4Use of a brake resistor ^ 445
65335 0xFF37 Automac start disabled Keypad display: Auto start disab
Cause Error type/response Remedy
At mains connecon, a start command was
already available and the automac start at
power-up is set in 0x2838:002 (P203.02) to "O
[0]".
Fault Deacvate start command and reset error.
65366 0xFF56 Maximum motor frequency reached Keypad display: Max. motor freq.
Cause Error type/response Remedy
•
The maximum motor speed set in 0x6080
(P322.00) is acve.
•
The maximum output frequency of the inver-
ter has been reached.
Warning Check applicaon.
Appendix
Error codes
657

Lenze i55AE155F Specifications

General

Brand	Lenze
Model	i55AE155F
Category	Inverter
Language	English