Driving mode
5.8 Towing a trailer
5 - 82 3 302 819 en Operating manual
GMK3060
13.12.2018
Coupling
the trailer
• Open the towbar coupling.
Push the lever (1) up until it latches into place.
• Check that the coupling jaw (2) is stable. It may
not be allowed to move to the left or the right
when the towbar coupling is open.
• Carefully drive the truck crane backwards so
that the towbar of the trailer is pushed into the
coupling jaw.
The towbar coupling closes automatically, and
the lever (1) swings downwards.
H
Make sure you check the prescribed condition of the coupling after each coupling
procedure.
The pin (1) may no longer protrude from the guide
bushing after the coupling procedure.
G
Risk of injury when the automatic closing device is triggered!
Do not put your hand into the coupling jaw when the towbar coupling is open.
This may activate the automatic closing device, causing the cotter pin to move
down with great force, seriously injuring your hand.
To Next Page
Loading...
Need help?
General
