Driving mode
5.8 Towing a trailer
Operating manual 3 302 819 en 5 - 83
GMK3060
13.12.2018
Connecting the
supply lines
• Insert the plug of the trailer's electrical system
into the socket (5).
• If necessary, insert the ABS connection cable
into the socket (3).
• First connect the hose of the brake pipe to the
yellow coupling head (4).
• Then connect the hose of the supply line to the
red coupling head (1).
Socket (2) is designed for special equipment.
• Check the function of the trailer lighting.
• Test the service brake and parking brake immediately after setting off.
s
G
Risk of accidents if the trailer is coupled improperly!
If the pin is protruding from the guide bushing, the trailer is not coupled properly
and could become disengaged from the towbar coupling while driving.
G
Risk of accidents if the hoses are too short or incorrectly routed!
The hose lines may not come off even when driving around corners. When
connecting the hoses, make sure they are long enough and have enough
clearance.
To Next Page
Loading...
Need help?
General
