Rigging work
12.5 Operating the outriggers
12 - 40 3 302 819 en Operating manual
GMK3060
13.12.2018
From the
control units
Starting the engine
• Start the engine from the driver's cab (à p. 4 - 1) or from the control units
(
à p. 4 - 17).
Moving the supporting cylinders
Assignment of buttons:
• Observe the safety instructions for operating
the supporting cylinders;
à p. 12 - 39.
The operation is the same for all supporting
cylinders.
• Press the button
• Also press the button for the desired supporting
cylinder, e.g. for 4.1.
You can also operate several supporting
cylinders at the same time.
The supporting cylinders move until you let go of the respective button or until the
respective end position has been reached.
1 Supporting cylinder 1.1
2 Supporting cylinder 2.1
3 Supporting cylinder 3.1
4 Supporting cylinder 4.1
5 All supporting cylinders (1.1) to (4.1)
1 For normal speed
2 For high-speed mode.
3 For retracting
4 For extending
To Next Page
Loading...
Need help?
General
