Precautions for Correct Use
Installation
•
Mount the product vertically on a wall with the product’s longer sides upright.
The material of the wall has to be nonflammable such as a metal plate.
Restart Selection Function
•
Do not come close to the machine while RUN command is enabled. When the restart selection func-
tion (b001, b008) is set, the machine may start abruptly.
Motor Overload Protection
•
For the motor overload protection, be sure to set the rated current of your motor to the Electronic
Thermal Level (b012/b212) and PM Motor Rated Current (H105).
Maintenance and Parts Replacement
•
Generally speaking, inverters contain components and will operate properly only when each compo-
nent operates normally. Some of the electrical components require maintenance depending on appli-
cation conditions.
Periodic inspection and replacement are necessary to ensure proper long-term operation of Invert-
ers.
•
When a cooling fan reaches the end of its service life, replace it.
Product Disposal
•
Comply with the local ordinance and regulations when disposing of the product.
Dispose of in accordance with WEEE Directive
To Next Page
Loading...
Need help?
General