EasyManuals Logo

PIAGGIO Liberty 125 User Manual

PIAGGIO Liberty 125
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Rules
This section describes general safety rules for any maintenance operations performed on the vehicle.
Safety rules
- If work can only be done on the vehicle with the engine running, make sure that the premises are well-
ventilated, using special extractors if necessary; never let the engine run in an enclosed area. Exhaust
fumes are toxic.
- The battery electrolyte contains sulphuric acid. Protect your eyes, clothes and skin. Sulphuric acid is
highly corrosive; in the event of contact with your eyes or skin, rinse thoroughly with abundant water
and seek immediate medical attention.
- The battery produces hydrogen, a gas that can be highly explosive. Do not smoke and avoid sparks
or flames near the battery, especially when charging it.
- Fuel is highly flammable and it can be explosive given some conditions. Do not smoke in the working
area, and avoid open flames or sparks.
- Clean the brake pads in a well-ventilated area, directing the jet of compressed air in such a way that
you do not breathe in the dust produced by the wear of the friction material. Even though the latter
contains no asbestos, inhaling dust is harmful.
Maintenance rules
- Use original PIAGGIO spare parts and lubricants recommended by the Manufacturer. Non-original or
non-conforming spares may damage the vehicle.
- Use only the appropriate tools designed for this vehicle.
- Always use new gaskets, sealing rings and split pins upon refitting.
- After removal, clean the components using non-flammable or low flash-point solvents. Lubricate all
the work surfaces, except tapered couplings, before refitting these parts.
- After refitting, make sure that all the components have been installed correctly and work properly.
- For removal, overhaul and refit operations use only tools with metric measures. Metric bolts, nuts and
screws are not interchangeable with coupling members with English measurement. Using unsuitable
coupling members and tools may damage the vehicle.
- When carrying out maintenance operations on the vehicle that involve the electrical system, make
sure the electric connections have been made properly, particularly the ground and battery connections.
Liberty 125 - 200 4tempi Characteristics
CHAR - 7

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PIAGGIO Liberty 125 and is the answer not in the manual?

PIAGGIO Liberty 125 Specifications

General IconGeneral
Displacement124 cc
Fuel SystemElectronic Injection
Front SuspensionHydraulic telescopic fork
Rear Brake140 mm drum
Front Tire90/80 - 16"
Rear Tire100/80 - 14"
Wheelbase1, 340 mm
Length1, 945 mm
Width690 mm
Seat Height790 mm
Engine TypeSingle cylinder, 4-stroke
Torque10.4 Nm @ 8, 000 rpm
Cooling SystemAir cooled
TransmissionCVT
Rear SuspensionSingle shock absorber
Front Brake240 mm disc
Fuel Tank Capacity6 liters
Weight124 kg

Related product manuals