Name: PIAGGIO Liberty 125
Brand: PIAGGIO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

- To assemble the new ball bearing insert it com-

pletely down in its housing with the specific punch

and finally assemble the Seeger ring.

Specific tooling

020375Y Adaptor 28 x 30 mm

020376Y Adaptor handle

020439Y 17 mm guide

Refitting the driven pulley

- Check that the faying surfaces between the 2

half-pulleys and the belt do not show any signs of

wear, scoring and grease.

- Insert the new oil seals and O-rings on the mov-

able half-pulley.

- Assemble the half-pulley on the ringlet with the

appropriate protection sheath.

- Make sure the pins and collar are not worn, re-

assemble the pins and collar.

- Use a greaser with a curved spout to lubricate the

driven pulley unit with around 6 g of grease. This

operation must be done through one of the holes

inside the bushing until grease comes out of the

opposite hole. This operation is necessary to avoid

the presence of grease beyond the O-rings.

Specific tooling

020263Y Driven pulley assembly sheath

Recommended products

AGIP GREASE SM 2 Grease for the tone wheel

revolving ring

Soap-based lithium grease containing NLGI 2 Mo-

lybdenum disulphide; ISO-L-XBCHB2, DIN

KF2K-20

Engine Liberty 125 - 200 4tempi

ENG - 72

PIAGGIO Liberty 125 Specifications

General

PIAGGIO Liberty 125 User Manual

Questions and Answers: