Polaris ACE 900 2017 User Manual

7
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
7.11
REAR BEARING CARRIER INSTALLATION
1. Apply anti-seize compound to the inner race of the
bearing. Insert bearing carrier on drive shaft.
2. Install the upper and lower control arm-to-bearing
carrier long bolts
q
. Install washers and new flange
nuts to secure bearing carrier to control arms. Torque
flange nuts to specification.
NOTE
Use new nuts upon installation of the rear bearing
carrier.
TORQUE
Control Arm-To-Bearing Carrier Fasteners:
42 ft-lbs (57 Nm)
3. Apply anti-seize to drive shaft splines. Install rear
wheel hub assembly
w
, cone washers
e
, and hand
tighten the castle nut
r
.
4. Install the rear brake caliper assembly and new bolts
t
. Torque to specification.
TORQUE
Rear Caliper Mounting Bolts:
40 ft-lbs (54 Nm)
FINAL DRIVE

Polaris ACE 900 2017 Specifications

General

Brand	Polaris
Model	ACE 900 2017
Category	Offroad Vehicle
Language	English