Polaris ACE 900 2017 User Manual

7
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
7.17
REAR DRIVE SHAFT REMOVAL
1. Elevate rear of vehicle and safely support machine
under the frame area.
CAUTION
Serious injury may result if machine tips or falls. Be
sure machine is secure before beginning this service
procedure. Wear eye protection when removing
bearings and seals.
2. Remove wheel nuts
q
and wheel.
3. Remove cotter pin
w
, hub nut
e
, and washers
r
.
4. Remove the two brake caliper mounting bolts
t
.
Remove the rear brake caliper assembly.
CAUTION
Do not hang the caliper by the brake line. Use wire to
hang caliper to prevent damage to the brake line.
5. Remove the two brake caliper mounting bolts
t
.
Remove the rear brake caliper assembly.
CAUTION
Do not hang the caliper by the brake line. Use wire to
hang caliper to prevent damage to the brake line.
FINAL DRIVE

Polaris ACE 900 2017 Specifications

General

Brand	Polaris
Model	ACE 900 2017
Category	Offroad Vehicle
Language	English