10
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
10.15
BODY COMPONENT REMOVAL
SEAT
SEAT ADJUSTMENT / REMOVAL /
INSTALLATION
Seat Adjustment
1. Push the seat adjuster lever
q
down to disengage
the latch. Slide the seat forward or rearward to adjust
position.
2. When desired seating position is achieved, release
the lever and then move the seat until the seat is
locked into place.
Seat Removal
1. Push and hold the seat adjuster lever
q
down. Slide
the seat forward until removed from track guides.
Seat Installation
1. Clean the track guides and the seat tracks prior to
installation.
2. Align the seat tracks with the two guides on the
frame.
3. Slide the seat into the guides until the seat stops
against the latch.
4. Push and hold the seat adjuster lever
q
down until
the seat is in the desired position.
5. Release the lever and then move the seat until the
seat is locked into place.
NOTICE
Apply a spray lubricant to seat channels and rails if seat
sticks when sliding.
BODY / FRAME
To Next Page
Loading...
Need help?
General
