3. Program the device certificate.
[Program] [Certificate 1] Make the necessary settings [OK]
Only [Certificate 1] can be created from the control panel.
"Installed" appears to the right of "Certificate Stat." to show that a device certificate for the printer
has been installed.
4. Log out.
Creating and Installing a Device Certificate from Web Image Monitor (Self-
Signed Certificate)
Create and install the device certificate using Web Image Monitor. For details about the displayed items
and selectable items, see Web Image Monitor Help.
This section explains the use of a self-signed certificate as the device certificate.
1. Log in as the network administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Device Certificate] under "Security".
4. Check the radio button next to the number of the certificate you want to create.
To use SSL/TLS, select [Certificate 1]. To use any other protocol, select the certificate number
desired.
5. Click [Create].
Click [Delete] to delete the device certificate from the printer.
6. Make the necessary settings.
7. Click [OK].
The setting is changed.
8. Click [OK].
Protecting the Communication Path via a Device Certificate
117