Ricoh SP 4510dn User Manual

7. Under "Encryption Strength Setting", specify the strength of encryption to be applied for
"AES", "3DES", and/or "RC4". You must select at least one check box.
Note that the availability of encryption strengths will vary depending on the settings you have
specified for "TLS1.2", "TLS1.1", "TLS1.0", or "SSL3.0".
8. Click [OK].
9. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
If the previous screen does not reappear after you click [OK], wait for a while, and then click the
web browser's refresh button.
10. Log out.
• If you set "Permit SSL/TLS Communication" to [Ciphertext Only], communication will not be
possible if you select a protocol that does not support a Web browser, or specify an encryption
strength setting only. If this is the case, enable communication by setting [Permit SSL/TLS
Communication] to [Ciphertext/Cleartext] using the printer's control panel, and then specify the
correct protocol and encryption strength.
•
The SSL/TLS version and encryption strength settings can be changed, even under [Network
Security].
• Depending on the states you specify for "TLS1.2", "TLS1.1", "TLS1.0", and "SSL3.0", the printer
might not be able to connect to an external LDAP server.
• If only TLS1.2 and TLS1.1 are enabled, Integration Server authentication cannot be performed.
• The following types of communication and data are always encrypted by SSL3.0: communication
via @Remote, Integration Server authentication, and logs transferred to Remote Communication
Gate S.
User Setting for SSL/TLS
We recommend that after installing the self-signed certificate or device certificate from a private
certificate authority on the printer and enabling SSL/TLS (communication encryption), you instruct users
to install the certificate on their computers. Installation of the certificate is especially necessary for users
who want to print via IPP-SSL from Windows Vista/7/8/8.1, Windows Server 2008/2008
R2/2012/2012 R2. The network administrator must instruct each user to install the certificate.
Select [Trusted Root Certification Authorities] for the certificate store location when accessing the printer
by IPP.
• Take the appropriate steps when you receive a user's inquiry concerning problems such as an
expired certificate.
Configuring SSL/TLS
123

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	306 mm
Weight	14000 g