Ricoh SP 4510dn User Manual

Installing the Device Certificate (Issued by a Certificate Authority)
Install the device certificate using Web Image Monitor. For details about the displayed items and
selectable items, see Web Image Monitor Help.
This section explains the use of a certificate issued by a certificate authority as the device certificate.
Enter the device certificate contents issued by the certificate authority.
1. Log in as the network administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Device Certificate] under "Security".
4. Check the radio button next to the number of the certificate you want to install.
To use SSL/TLS, select [Certificate 1]. To use any other protocol, select the certificate number
desired.
5. Click [Install].
6. Enter the contents of the device certificate.
In the certificate box, enter the contents of the device certificate issued by the certificate authority.
If you are installing an intermediate certificate, enter the contents of the intermediate certificate also.
For details about the displayed items and selectable items, see Web Image Monitor Help.
7. Click [OK].
8. Wait for about one or two minutes, and then click [OK].
"Installed" appears under "Certificate Status" to show that a device certificate for the printer has
been installed.
9. Log out.
Installing an Intermediate Certificate (Issued by a Certificate Authority)
This section explains how to use Web Image Monitor to install an intermediate certificate issued by a
certificate authority.
If you do not have the intermediate certificate issued by the certificate authority, a warning message will
appear during communication. If the certificate authority has issued an intermediate certificate, we
recommend installing the intermediate certificate.
1. Log in as the network administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Device Certificate] under "Security".
4. Check the radio button next to the number of the certificate you want to install.
5. Click [Install Intermediate Certificate].
Protecting the Communication Path via a Device Certificate
119

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	306 mm
Weight	14000 g