Offset Range Meaning Error Code
8 Bit 0: 0/1 PROCESSING FLAGS
Bit 1: 0/1 Defined/Undefined
Bit 2: 0/1 Defined/Undefined
Bits 3-7 Incrementing/Nonincrementing Reserved
9-n CODE POINT X'02B0..0
7'
Load Code Page Control
This command describes a code page resource which will be used to carry code page data. The Load
Code Page Control (LCPC) command is followed by one or more Load Code Page (LCP) commands
that specify the code page data.
The LCPC command is valid only in Home State and causes a transition to Code Page State. Code Page
State ends when the printer receives the End command following receipt of at least one LCP command.
Offset Range Meaning Error Code
0-1 X'0001' -
X'7EFF'
CODE PAGE HOST ASSIGNED ID X'02B0..0
0'
X'02B0..0
1'
2-3 ENCODING SCHEME X'02B0..0
2'
Bits 0-3:
0000
Reserved
Number of Bytes
Bits 4-7:
0001
Fixed Single-byte
Bits 4-7:
0010
Fixed Double-byte
Bits 8-15:
0000000
0
Reserved
10. Loaded Font Command Set
198