EasyManuals Logo
Home>Ricoh>Printer>SP 4510dn

Ricoh SP 4510dn User Manual

Ricoh SP 4510dn
955 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #530 background imageLoading...
Page #530 background image
Resolving System i Problems
Use this section to resolve problems configuring System i on TCP/IP networks.
Printer Cannot be PINGed
If you have problems pinging the printer:
Verify the configuration of System i, including the printer and any intervening devices such as
routers and bridges.
Verify that the System i line description is varied on and the printer is turned on and displays a
status of READY.
Verify that the System i TCP/IP interface is active.
If PSF/400 Terminates When Initialized
If PSF/400 terminates when you initialize it for IPDS printing and issues message PQT3603, check for
the following error codes.
10 means an incorrect RMTLOCNAME has been specified for the printer.
15 means that PSF/400 timed out waiting for the printer’s response. You should check the value
you entered for Activation Timer when using CRTDEVPRT.
Codes 20-39 indicate a general communications failure. Make sure all of the components in your
network are operational, such as routers.
Codes 40-59 indicate a logic error between PSF and the printer control unit.
Spooled Print File Remains in PND Status
Check the output queue with the command:
WRKOUTQ OUTQ (queuename)
This typically indicates that PSF/400 is waiting for a response from the printer.
This can be verified by displaying the QSPL subsystem, WRKACTJOB SBS (QSPL). If the status of the PDJ
job for the printer is SELW, then PSF/400 is waiting for a response from the printer. Make sure that the
printer is online and in READY status and that all network connections (for example, routers) between the
System i and the printer are active.
3. Configuring System i for an IPDS Printer
28

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP 4510dn and is the answer not in the manual?

Ricoh SP 4510dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLED
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)5 s
Print speed (black, normal quality, A4/US Letter)40 ppm
Printing colorsBlack
Maximum duty cycle150000 pages per month
Number of print cartridges1
Page description languagesPCL 5e, PCL 6
Total input capacity600 sheets
Maximum input capacity1600 sheets
Paper tray media typesPlain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight52 - 162 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesLetterhead
Maximum ISO A-series paper sizeA4
Wi-Fi-
Supported network protocols (IPv4)TCP/IP
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
Storage mediaHDD
Internal memory512 MB
Maximum internal memory1536 MB
Internal storage capacity320 GB
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1110 W
Power consumption (printing)- W
Power consumption (PowerSave)1 W
Product colorGrey, White
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth392 mm
Width370 mm
Height306 mm
Weight14000 g

Related product manuals