Ricoh SP 4510dn User Manual

Load Font Equivalence
The font equivalence record is a list of 0 to 254 font equivalence entries (each entry is 16 bytes). The
font equivalence record permits the host program to equate a Local-Font ID (specified in text control
page 115 "Set Coded Font Local", page 174 "Bar Code Data Descriptor", page 172 "Write Bar
Code Control", or graphics order "Character Set", IPDS Technical Reference 1) with:
•
Font Host Assigned ID (HAID)
• The Font Inline Sequence or character rotation table to be used when processing characters
• Global Resource ID (GRID) for resident fonts. The GRID is made up of the following components:
• GCSGID Graphic Character Set Global ID
• CPGID Code Page Global ID
• FGID Font Global ID
• FW Font width in 1/1440 inch units
If a GRID is specified in bytes 5-12, the entry is requesting the activation of a coded font and assigning
a HAID to it. The printer uses the information provided in the GRID to locate the component parts of the
coded font. First, the GCSGID and FGID values are used to find the font character set, and GCSGID
and CPGID are used to find the code page. In some cases, the printer will locate the code page using
just the CPGID value. If the character set and code page are not found in the above manner, information
in the GRID will be used together with the Font Inline Sequence value (Bytes 3-4) to locate a single-byte
fully described font and font index.
The set of supported GCSGID/CPGID/FGID/FW (GRID) combinations (described in "Code Page and
Font Identification", IPDS Technical Reference 1) is available to the host PSF by means of the XOA-RRL
command. For typographic and scalable fonts, a Font Width (FW) must be specified in order to uniquely
select a point size, unless FW=0 or X'FFFF', in which case the printer's control panel [Characters Per
Inch] setting is used ([Characters Per Inch] on the IPDS Menu).
Exception X'021D..02' is reported back if a non-zero GRID is requested with parts that are not
supported in the printer, except in the case of GCSGID subset substitution or LFE Bold Attribute
substitution.
For outline coded fonts, the FW value is used to derive a scale factor as follows:
• For typographic and proportionally spaced fonts, both horizontal and vertical scale factors are 3
(FW).
• For fixed pitch, uniform character increment fonts, both horizontal and vertical scale factors are
derived using the following algorithm (fractions are truncated):
V_Scale = H_Scale = 1000
*1
FW/SPACE
In this case SPACE is the value of the Space Character increment in relative units.
*1
4028-type font substitution is provided as the printer's control panel feature. It is independent of the device
emulation mode setting (native or 4028). Default is No Font Substitution.
Load Font Equivalence
35

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	306 mm
Weight	14000 g