Ricoh SP 4510dn User Manual

Selectable IPDS Default Font
To change the default font requires the use of the printer's control panel. The printer's control panel will
present menu choices for selecting the various parts of the font.
The operator may select the default font using any or all of the Code Page (CPGID), Font (FGID), and
Characters Per Inch (CPI) parameters. The available parameters will be listed in Groups to help identify
valid/invalid combinations. An invalid combination will be resolved inside the printer because the
printer must have a valid default font. However, the parameter adjustment will not be visible at the
printer's control panel display. Detailed information listing the valid combinations and how to select them
will be available with the printer.
The selection is based upon a hierarchy: Code Page is highest, Font is next, and Font Width (CPI) is the
lowest. Should an invalid combination be selected, the Code Page will override Font and CPI, and Font
will override CPI.
There are 5 Groups, A-E, into which all the fonts, code pages, and widths fall. All combinations defined
within a Group are valid. When internal modification is necessary, the following rules apply:
•
An invalid/unsupported CPGID becomes Code Page 037 (Group A).
• An invalid/unsupported Font Width (CPI) becomes 10.0 CPI (which will translate to 12 points).
• For a Group A CPGID, an invalid/unsupported FGID becomes 416 Courier Roman Medium.
• For a Group B CPGID, the FGID is automatically 304 Gothic Katakana.
• For a Group C CPGID, the FGID is automatically 305 OCR A. Font Width is 10.0 CPI.
• For a Group D CPGID, the FGID is automatically 306 OCR B. Font Width is 10.0 CPI.
• For a Group E CPGID, an invalid/unsupported FGID becomes 416 Courier Roman Medium.
• The 4028 compatibility fonts are a new addition to the printer's control panel selection. This is
necessary because some of these FGIDs are anamorphically scaled, and therefore cannot be
correctly reproduced with just an AFP FGID and a CPI value.
These fonts are handled specially in that all of these FGIDs (except 5687, 5707, 5815, 5835) ignore
the printer's control panel CPI value, because the FGID fully describes the font. In the case of the 4
typographic FGIDs, there are valid discreet sizes associated with them. If the correct CPI values are not
used, the printer will default to the nearest discrete size value. Tie goes to the smaller value.
Selectable Code Pages
The following code pages are selectable by the operator:
Code-Page/Group Code Page Description
500 A Belgium, Switzerland / International
Selectable IPDS Default Font
123

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	306 mm
Weight	14000 g