Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
138 Configuration Manual, 10/2014, C79000-G8976-C187-22
Command
Description
Comment
vlan0 [E|D] Enables/disables the VLAN 0 Aware
mode.
Administrator only
rstp [D|S|R|M] Enables/disables rapid spanning tree
functionality for all IE switch ports.
The meaning of the parameters is as
follows:
• D
Disables STP/RSTP
• S
Enables STP
• R
Enables RSTP
• M
Enables MSTP
Administrator only
eplc [E|D] Enables/disables enhanced passive
listening compatibility.
Administrator only
bnsupp[E|D]
Enables/disables big network support.
Administrator only
macl [E|D] Enables/disables the Management ACL
function
Administrator only
blkucast [<E|D> [ports]] Display/set Unknown Unicast Blocking
Mask.
Administrator only
blkmcast [<E|D> [ports]] Display/set Unknown Multicast Blocking
Mask.
Administrator only
blkbcast [<E|D> [ports]]
Display/set Broadcast Blocking Mask.
Administrator only
fastlrn [<E|D> [ports]]
Display/set Fast Learning Configuration.
Administrator only
4.5.2
Port status
Overview of the configuration of the ports
The "Port Status" screen appears if you click the "Ports" folder icon.
The screen shows the configuration for data transfer for all ports of the IE switch (and, if
appropriate, for the ports of the extender).
Figure 4-49 Port status

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English