Siemens SCALANCE X-400 Configuration Manual

Assignment of an IP address
3.6 Address assignment with the Primary Setup Tool
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
31
3.6
Address assignment with the Primary Setup Tool
Introduction
The PST (Primary Setup Tool) is capable of assigning such an address to unconfigured
devices without an IP address.
Prerequisite
This is only possible when the devices can be reached over Ethernet.
Note
For more detailed information, refer to the Primary Setup Tool configur
ation manual.
You will find the PST at Siemens Industry Automation and Drives Service & Support on the
Internet under entry ID 19440762 and with the following Link:
Primary Setup Tool (PST) (
http://support.automation.siemens.com/WW/view/en/19440762)

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English