Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.1 General information on Web Based Management and Command Line Interface
SCALANCE X-300 / X-400
34 Configuration Manual, 10/2014, C79000-G8976-C187-22
4.1
General information on Web Based Management and Command
Line Interface
4.1.1
Introduction
Note
The screens described in this section apply to both the SCALANCE X
-300 and the
SCALANCE X
-400. The screens shown here are based on those of the SCALANCE X-400.
Dev
iations are possible depending on the configuration and device.
Principle of Web Based Management
IE switches have an integrated HTTP server for Web Based Management. If an IE switch is
addressed using a Web browser, it returns HTML pages to the client computer depending on
the user input.
The user enters the configuration data in the HTML pages sent by the IE switch. The IE
switch evaluates this information and generates reply pages dynamically. The great
advantage of this method is that apart from a Web browser, no special software is required
on the client.
Requirements for Web Based Management
● An IE switch must have an IP address before you can use Web Based Management.
● To use Web Based Management, there must be an Ethernet connection between the IE
switch and the client computer.
● Use of a Microsoft Internet Explorer, version 5.5 or higher is recommended.
● All the pages of Web Based Management require JavaScript. You should therefore make
sure that Java Script is enabled in your browser settings.
Note
The browser must not be set so that it reloads the page from the server each time the page
is accessed. The updating of the dynamic content of the page is ensured by other
mechanisms. In the Internet Explorer, you can make th
e appropriate setting in the
Options >
Internet Options > General
menu in the section Temporary Internet Files with the Settings
button.
Below the text
Check for newer versions of stored pages , the Automatically check box must
be selected.
● Web Based Management is HTTP- or HTTPS-based, so you must also enable access to
port 80 or 443 if you have a firewall installed.

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English