Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
223
Syntax of the Command Line Interface
Table 4- 69 QOS Configuration - CLI\SWITCH\QOS>
Command
Description
Comment
cos [<0..3> <0..7>] Assigns CoS priorities to certain traffic
queues:
• Parameter 1
Queue
• Parameter 2
CoS priority
Administrator only.
4.5.15.3
DSCP to Queue Mapping
DSCP Queue
Here, DSCP settings are assigned to various traffic queues.
Figure 4-96 DSCP to Queue Mapping
DSCP
The order of DSCP priorities of the incoming packets.
Queue
The traffic-forwarding queue (send priority) that is assigned the DSCP value.

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English