Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
222 Configuration Manual, 10/2014, C79000-G8976-C187-22
Syntax of the Command Line Interface
Table 4- 68 QoS Configuration - CLI\SWITCH\QOS>
Command
Description
Comment
dscpmap [E|D]
Enables/disables DSCP to Queue Mapping.
Administrator only.
bcprio [noforce : <0-7>] Specify the priority with which broadcast frames
are sent.
Administrator only.
agentprio [noforce : <0-7>] Specify the priority with which agent frames are
sent.
Administrator only.
sched [mode]
Specifies the scheduling mode.
Administrator only.
4.5.15.2
CoS to Queue Mapping
CoS Queue
Here, CoS priorities are assigned to certain traffic queues.
Figure 4-95 CoS to Queue Mapping
CoS
The order of CoS priorities of the incoming packets.
Queue
The traffic-forwarding queue (send priority) that is assigned the CoS priority.

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English