Spindles (S1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
5-1
Data Lists
5
5.1 5.1 Machine data
5.1.1 NC-specific machine data
Number Identifier: $MN_ Description
10192 GEAR_CHANGE_WAIT_TIME Wait time for acknowledgment of a gear step change
during reorganization
10714 M_NO_FCT_EOP M function for spindle active after RESET
12060 OVR_SPIND_IS_GRAY_CODE Spindle override with Gray coding
12070 OVR_FACTOR_SPIND_SPEED Evaluation of spindle speed override switch
12080 OVR_REFERENCE_IS_PROG_FEED Override reference velocity
5.1.2 Channelspecific machine data
Number Identifier: $MC_ Description
20090 SPIND_DEF_MASTER_SPIND Initial setting for master spindle on channel
20092 SPIND_ASSIGN_TAB_ENABLE Enabling/disabling of spindle converter
20850 SPOS_TO_VDI Output of auxiliary function "M19" to the
VDI interface
22400 S_VALUES_ACTIVE_AFTER_RESET S function active after RESET
To Next Page
Loading...
Need help?
General
