Feeds (V1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
5-1
Data Lists
5
5.1 5.1 Machine data
5.1.1 NC-specific machine data
Number Identifier: $MN_ Description
10704 DRYRUN_MASK Activating the dry run feed
10710 PROG_SD_RESET_SAVE_TAB Setting data to be updated
11410 SUPPRESS_ALARM_MASK Mask for suppressing special alarms
11550 STOP_MODE_MASK Inhibit stop events in program section
12000 OVR_AX_IS_GRAY_CODE Axis feed override switch Gray-coded
12010 OVR_FACTOR_AX_SPEED Evaluation of the axis feed override switch
12020 OVR_FEED_IS_GRAY_CODE Path feed override switch Gray-coded
12030 OVR_FACTOR_FEEDRATE Evaluation of the path feed override switch
12040 OVR_RAPID_IS_GRAY_CODE Rapid traverse override switch Gray-coded
12050 OVR_FACTOR_RAPID_TRA Evaluation of the rapid traverse override switch
12060 OVR_SPIND_IS_GRAY_CODE Spindle override switch Gray-coded
12070 OVR_FACTOR_SPIND_SPEED Evaluation of the spindle override switch
12080 OVR_REFERENCE_IS_PROG_FEED Override reference velocity
12082 OVR_REFERENCE_IS_MIN_FEED Defining the reference for the path override
12100 OVR_FACTOR_LIMIT_BIN Limit for binary-coded override switch
12200 RUN_OVERRIDE_0 Traversing with override 0
12202 PERMANENT_FEED Fixed feedrates for linear axes
12204 PERMANENT_ROT_AX_FEED Fixed feedrates for rotary axes
12240 SCALING_SYSTEM_IS_METRIC Basic system metric
To Next Page
Loading...
Need help?
General
