273
When the path type for a curve (Curve) is set to [Off],
the cross-point hold (Xpt Hold) and hue (Hue)
settings are disabled. When the path type for a curve
(Curve) is set to [Step], the hue (Hue) setting is
disabled.
Executing an Effect
Timeline
You can execute an effect timeline using the utility/
shotbox control block, utility control block, or in the
menu.
You can also recall a shotbox register with a registered
effect
timeline region and register in the Flexi Pad control
block to execute an effect timeline.
For details, see “Executing a Shotbox (Flexi Pad Control
Block)” (page 300).
You can also operate an effect timeline manually using
the
keyframe fader in the transition control block/
transition control block (simple type) or the Z-ring in the
device control block.
Executing an Effect Timeline
(Utility/Shotbox Control Block)
You can select a region and recall an effect timeline
register using the numeric keypad control block or the
menu.
For details about recall operations using the numeric
ke
ypad control block, see “Recalling an Effect Timeline”
(page 258).
For details about recall operations using the menu, see
“Recalling an Effect Timeline” (page 264).
You can also select a region and recall an effect timeline
reg
ister by recalling a shotbox register in the utility/
shotbox control block.
For details, see “Executing a Shotbox (Utility/Shotbox
Control Block)” (page 300) and “Assigning a Utility
Function” (page 400).
Executing an effect timeline
Press the [RUN] button.
The [RUN] button is lit amber a
nd the effect timeline is
executed.
When stopped by a pause, the [RUN] button is lit green.
Press the [RUN] button, li
ghting it amber, to resume
effect timeline execution.
3 Continuity Continuity
Note
No. Parameter Adjustment
Note
To Next Page
Loading...
Need help?
General
