481
Control Panel
Maintenance
Replacing Keytop Labels
When changing a button assignment, you can change the
display label using the keytop replacement tool supplied
with the control panel. For details, refer to the ICP-X7000
Installation Manual or ICP-X1224/X1124/X1216/X1116
Installation Manual.
Cleaning the Control Panel
Wipe gently using a soft, dry cloth to remove dirt from the
control panel body, switches, fader lever, and other
components.
Wipe using a cloth moistened with wate
r or lukewarm
water to remove stubborn dirt and stains.
• Squeeze the cloth thoroughly before use to ensure that
no
water droplets can enter the panel. The unit may
become damaged if water droplets enter the unit.
• Do not use cleaning agents, solvents, or detergents.
• Vigorous rubbing may scratch the unit.
About LCD buttons
If you have any concerns about dust or other matter on the
LCD but
tons in the following control blocks, contact your
Sony service representative.
• Cross-point pad in the cross-point control block/AUX
bu
s control block
• Flexi Pad control block
• Utility/shotbox control block
• Utility control block
Notes
To Next Page
Loading...
Need help?
General
