180
Setup for Windows
®
OS
Pre-install Windows
®
Printer Drivers
Install the Zebra Setup Utilities (ZSU) before applying power to the printer connected
to the PC (running a Zebra driver supported Windows operating system). The utility installs
the Zebra Windows drivers first. The ZSU installation wizard will then prompt you to apply
the printer power. Continue to follow the instructions to complete your printer installation.
The Zebra Setup Utility is designed to assist you setting up printer communication
on a PC running the Windows operating system. The cabling and unique parameters
for each of these physical printer communication interfaces is discussed in the following
pages to assist you with making configuration setup choices prior to and immediately
following applying power. The Zebra Setup Utilities configuration wizards will instruct you
to turn the printer’s power on at the appropriate time to complete the installation of your
printer.
For more details on installing Ethernet (network) and Bluetooth interfaces:
• Wired and Wireless Print Servers User Guide
• Bluetooth Wireless Guide